Home
Join

4 Replies

  • What type of communication security is being used? Upgrading to 7.4 automatically disables some TLS and SSL protocols. This may help:https://www.ibm.com/support/pages/configuring-your-ibm-i-system-secure-sockets-layer-ssltransport-la...

    Was this post helpful? thumb_up thumb_down
  • Good point, hadn't thought to look at that as I was of course expecting if it's just a telnet session to the Digi from the iSeries it would just run.

    Will find out if the Digi units are at a back level\weaker cipher that isn't allowed, and how to set it if possible.  Or if it applies to this setup in the first place.

    Was this post helpful? thumb_up thumb_down
  • gave that a whirl as i found the firmware was from 2018 and there was a newer version from 2020 specifically mentioning TLS versions changing.  also found that the advanced setting for enabling Binary mode hadn't been selected.  Have verified the port and ip, can ping the device from the 400. can telnet to the port and give it modem commands from putty.....still no joy.

    starting to wonder if i need to change the terminal type from the default vt100 on the digi.  the port is set to being a modem as it should be.

    Was this post helpful? thumb_up thumb_down
  • As a further update, with IBM support we've verified that the most likely issue is that the Digi Portserver modem is set to DSR On, and we'll need it to be on when needed instead.  Fax 400 is expecting a switched line for the Async line description, unfortunately during the Create Fax Description Wizard you are not give the option to set the LinD to non-switched.

    Then of course that is a value that isn't an option to change in the LinD afterwards, and the Add Fax Card command to create the controller and device description can't just be point to a non-switched LinD....

    The IBM document does have instructions for the string to be used to set a Multitech modem to not be DSR On, however the command (even though it appears generic) does not seem to have the desired effect on the Digi Modem and following a reboot is still DSR On.   

    400 has zero problem communicating with the modem on a nonswitched async LinD and submitting AT commands with STRITF to dial a number work with no issue.  We're close, however stuck at the moment waiting for Digi to advise how to set DSR to not be On continuously, or for IBM to advise how to use a non-switched line with Fax400.  Unfortunately the one thing we don't have is another modem on hand....would almost be happy to see an old Penril 14.4k these days.

    Was this post helpful? thumb_up thumb_down

Read these next...

  • Snap, AD auth fixes, Canada bans Huawei, Linux, space lasers, & Daredevil

    Snap, AD auth fixes, Canada bans Huawei, Linux, space lasers, & Daredevil

    Spiceworks Originals

    Your daily dose of tech news, in brief. Welcome to not only Friday, but according to Lonny6654 who wrote today's community-created Spark article, it is also World Bee Day. To raise awareness of the importance of pollinators, the threats they face, ...

  • The SOC Briefing for May 20th - Updates Here we Come!

    The SOC Briefing for May 20th - Updates Here we Come!

    Security

    Good morning and welcome to today's briefing. We have a lot of updates and none more relevant than Microsoft since their AD Authentication issues from last week's patch Tuesday. We have some updates for VMware, WordPress, QNAP, SOnicwall and Apple. We th...

  • Spark! Pro series – 20th May 2022

    Spark! Pro series – 20th May 2022

    Spiceworks Originals

    Happy Friday and Happy World Bee Day!  As I had stated in a previous Spark!  I am a first time BeeKeeper this year!  Find out more about World Bee Day and our little friends here. Just a reminder, if you are re...

  • World Bee Day 2022

    World Bee Day 2022

    Holidays

    May 20th is World Bee Day,  a day to heighten awareness about our little friends.  So be sure to celebrate with a glass of Mead and learn more about honey bees.  I have included my take on our little friends an...

  • What do you want to play this weekend?

    What do you want to play this weekend?

    Water Cooler

    I'm always asking "What did you play this weekend" and never "What do you want to play this weekend" but not only that what do you want to do in general?Me? Well, I firmly believe the weekend starts on Friday, but specifically after you clock out. So, wit...