Having some issues for routing traffic from a 5406zl procurve switch through 5 tagged 2930f procurve switches and a 8212zl switch. I want to route all traffic to my firewall which currently is directly connected to the 8212zl switch. I will add network topology/diagram to show routing and vlan current setup. I would like to route traffic from 172.16.0.0/16 and 192.168.10.0/24 subnets to 10/8 subnet.
- View 9 other comments
Jun 21, 2022 at 22:36 UTC
Another thing…does it matter the routing being done on the L2 switches to point back to the OPS switch? I’m assuming the new vlan should handle the point to point connection and bypass the routing on these correct! Do I need to add this new vlan to the L2 switches? Sorry for all the questions just making sure I understand fully the VLAN network topology approach.
Jun 22, 2022 at 11:38 UTC
Regarding the firewall that plan to move them to trust is correct - treat them as internal. But the routes cannot be to 192.168.123.2 because the firewall is not connected to that. the route would be to the core ZL switch via 10.0.0.1
From the diagram the network is currently setup with 2 core routing switches, one on left and one on right.
for L2 switches the only 'routing' they do is for their own communications - so that you can monitor and manage them. They do not route user device traffic - only the default gateway of the user device does that - which I assume to be Ops switch for vlan 1 & 10, and ZL left switch for vlan 2.
I'm looking to purchase a few of the HP Aruba 5130 (either JG933A or JG932A), but i'm wary about any hidden costs (i'm thinking CISCO DNA license). Could someone confirm who has bought them that i can purchase the product and use it without having to buy another other software licenses etc.?
Dec 2, 2021 at 11:12 UTC
How can it be considered as hidden costs if you require licenses for additional features and/or software modules ?
Would you consider power and cooling and maybe real estate to be hidden costs as well ?
How about extension of warranty coverage and increased SLA to be part of hidden costs as well ?
Dec 2, 2021 at 11:40 UTC
Don't take my question as a criticism, I understand there are requirements to pay for ongoing product support, extra PSU (or even a single one) etc. i'm just keen to avoid purchasing the hardware and not being able to use it without purchasing a further licenses out of the box. This more for budget reasons than anything else to be honest.
Hope that makes sense.
Has anyone come across an issue with the DesignJet T830 series printer.
- we are experiencing the following, it will only print 1 page at a time.
- No matter what page type you set, ie A0, A1, A3 when it goes and prints A4 only.
has anyone seen this behaviour before.
Note: printer was working fine for user, but right now its doing the above...
Oct 20, 2021 at 18:50 UTC
Have you installed the latest driver from hp?
Can you try printing with HP click, this has worked for me with production printers in the past.
Is there any page defaults set on the printer?
Anyone can recommend HP Laptop, Desktop or server suppliers in UK?
- View 2 other comments
Jun 15, 2021 at 09:42 UTC
Its for the company. Basically in Central London. Thanks for the reply mate
Jun 15, 2021 at 09:45 UTC
Its for the company. Basically in Central London. Thanks for the reply mate
If you need some extra digging let me know.
What is going on with the apparent HP Authorization backlog? I've purchased HP SmartBuy systems through distribution for many years, and I started the process for HP authorization, as required by HP, but now I've been told by distribution that there's a 8-10 week backlog for authorization processing. I submitted my information to HP weeks ahead of the May 1 deadline.
Can someone put me in touch or direct me to where I can acquire the HP Device Manager Software, server side? Here is the link to the product page I am looking at: HP Device Manager Software
I would like to use it to image HP T530's.
I have asked my sales representative but they were utterly useless. I have purchased these through Eide Bailly, and when I contacted then and even sent them the link they told me 'Device Manger is an included management tool found on the Thin Clients. Questions or support on Device Manager would be handled by HP Support.' They don't seem to have any clue about the server side of the software so they can't help me.
Apr 19, 2021 at 15:01 UTC
Okay, so two things.
We just officially moved all of our thin clients, including our T530's to Stratodesk. The pricing is unbelievably reasonable (and perpetual!!!), and it is seriously 1000x better than HPDM / ThinOS.
I must warn you that HP Device Manager is possibly the worst management application ever created. Not only because it doesn't work consistently, or that the feature set is very limited, or that it is clunky and difficult to learn. But mostly because getting support for it is a complete joke.
Stratodesk has a simple OVA or VHDX template to deploy and setup in minutes, and it just works. Tons of innovative features, like native Zoom and Teams apps (so you can use the Thin Client for more than just connecting to your VDI / Terminal Server). Tons of other stuff too. Seriously. Check out Stratodesk.
(EDITED because HP's site is a joke) If you insist on moving forward with HPDM, then you need to:
- Follow the link in your post, click SELECT and then Click the SIGN UP Link. This should get you access so you can download.
- Once you realize how bad HPDM is, go HERE for more info on Stratodesk.
Hope that helps.Edited Apr 19, 2021 at 15:29 UTC
Have tried to download the fingerprint drivers but still not working
Mar 19, 2021 at 13:22 UTC
Why use it anyway?? It "ain't" secure.....
Mar 19, 2021 at 14:46 UTC
Did it ever work? Maybe not plugged in from the factory? Did you check the BIOS to see if it is disabled? Does it show up in Device manager??
Officejet 6100 h611a Factory Reset
Mar 11, 2021 at 02:34 UTC
And just what do you want to know? A little more detail would be great as we're not mindreaders here, just a bunch of folks that like to help others out, that's right, we're not paid either.
Are we still in a hurry up and wait status ? Wink twice if it's coming out soon
- View 1 other comment
Feb 21, 2021 at 23:36 UTC
The post is asking for the Estimated Time of Arrival on gen 11 servers. They are currently on Gen 10 and have been for a very long time, much longer than previous iterations. It has large scale fiscal implications in my datacenter and is a pretty legit question.
I don't know what that has to do with angry Spaniards, what I can tell you is that being angry and lashing out never helps to solve anything.
Feb 22, 2021 at 03:05 UTC
As far as I can see, it was you first making such a reference to the basque separatist group ETA by choosing to ignore the rules taught in college for introducing abbreviations which cannot be assumed globally known and established. And the Spiceworks community guidelines reminded you that we're a global community, not just a community of US professionals. Here in Europe, this terror group was well known and in the US, it was known as one of two possible causes for a blow up of the political project called EU.
And no, ETA doesn't consider themselves Spanish. They continue fighting politically after declaring armistice. They are separated by an international border. Their region of living is mainly split between Spain and France. Their people is called Basque. They have their own language which isn't neither Spanish nor French with considerable group of descendants living also in Chile, South Africa, Australia, Canada and the US. Their language and some biological hints are much older than these French and Spanish peoples. If I remember right, you may configure LibreOffice and some other software tools for basque localization.
Not sure. But I agree that anger provides seldom good advice nor direction. And who do you consider angry as I couldn't find any such reference neither in my reply nor in your post?
The post is asking for the Estimated Time of Arrival on gen 11 servers.
Thanks for complementing clarification. In my country, we don't have college. But in our curriculaes of the different States, we used to learn correct quoting and correct introduction of abbreviations in school, 1-2 years before to what comes close to college.
And as far as such servers are concerned, I haven't seen one materialize yet. But there was an announcement of such HPE ProLiant DL380 Gen11 rack mount servers back in July 2019 as far as I understood, and a source where you may request quotes. Have you already tried to get a quote and delivery date from that source?
I have the "HP PageWide Pro 477dw MFP" printer and it went out of ink for a while, when replacing the ink I receive the following error, and until now didn't get any fixes!
I had several error messages: <0xc6fd0513> & <0xc6fd0313> & <0xc6fd0713>
Could you please help me figure out how I can solve this?
What is your best purchase for a HP laptop?
I am wanting to purchase a couple to keep on hand should Covid hit again and there is a need to have users WFH.
Has to have Ethernet port at the very least. We have a couple HP Probook 650 i5. Looking to upgrade if possible.
- View 4 other comments
Aug 31, 2020 at 13:13 UTC
HP EliteBook 840 G6
Will look at that one. Thank you.
Sep 16, 2020 at 23:19 UTC
I have deployed over 150 of the Elitebook 745 G6's and they have been rock solid and amazing, also has a Ethernet port built in
Have a flat network of 10.0.0.0/24. Trying to do a default gateway to route unknown traffic to the firewall of 10.0.0.1. I can ping the inside of the firewall but when i go to set the default global gateway address i get the following error "unable to set a default global gateway value do to a conflict with a network port". None of the ports currently have an IP address however i set the management of the witch ip to 10.0.0.4 with no gateway.
Aug 20, 2020 at 16:23 UTC
Also when trying a default route of 0.0.0.0 0.0.0.0 10.0.0.1 i get an invalid subnet mask.
Aug 20, 2020 at 17:49 UTC
Are you possibly talking about an HPE 1920S? What if you configured the switch address with the gateway of 10.0.0.1, and after that, try setting that default route?
i did factory reset for my printer hp 8620 . now print head not moving, and in display field no print option
Aug 5, 2020 at 16:31 UTC
Try pulling all the cartridges out and resetting them also the restart the printer. If that doesn't work I would get hold of HP support and download thier troubleshooting tools.
When I play a HD video in my desktop computer it brings red spots in the video
Jul 13, 2020 at 04:10 UTC
Welcome to the community.
Unfortunately you posted the equivalent question of "my car makes a noise". We need a bit more information. What kind of noise, make and model of car, etc.
What operating system are you running? Since it's a video problem, what video card do you have? Are the drivers up to date? What format video are you playing and what player are you using? Can you possible post a screen shot so we can see what's happening?
Customize Header Background
Customize Page CSS
This is the CSS that will be included for all tabs for this vendor page.